Cardinal Detecto 8435 Manuel du propriétaire télécharger pdf (Page 5)

8525-M316-O1 Rev A x 8435(KG)

OPERATION

DO NOT press the keys on the keypad with pointed objects (pencils, pens, etc).

Damage to keypad resulting from this practice is NOT covered under warranty.

Basic Weighing

1. Place scale on a level, stable surface.

2. With the baby tray empty, press ON/OFF

key to turn on indicator.

3. Press ZERO key to zero weight display.

The ZERO and lb or kg annunciator will

turn on to show that scale is ready to

weigh baby.

4. Lay baby being weighed in the center of

baby tray. This will distribute the weight

evenly across the scale platform.

5. Read weight display.

6. Remove baby from baby tray.

Zero Weight Display

1. If the indicator is not showing zero weight

on the display, press ZERO key.

2. Weight display will return to zero. The

ZERO, STABLE

and lb or kg

annunciators will turn on to show a stable,

center-of-zero weight condition.

Zero Weight Display with Item on Scale

1. Place item (blanket or similar covering) on scale.

2. Weight display will show weight of item on scale.

3. Press ZERO key.

4. Weight display will return to zero. The ZERO, STABLE

and lb or kg annunciators will

turn on. The item’s weight has been "zeroed off".

5. Proceed with weighing operation.

Metric Conversion

Press UNITS key to toggle between pounds and kilograms. Note that lb or kg annunciator

will turn on to show which weighing unit is active.

Figure No. 2

CAUTION!

Do not leave the baby unattended in the baby tray. Failure to

maintain continual control of the baby can result in serious

injuries should the baby fall from the baby tray.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Cardinal Detecto 8435 Manuel du propriétaire Page 5